RIGGING, SAILS, SAFETY
Selden CX-25 Gennaker/Code 0 Furler purchased end of 2014
Only used twice
$1,935
Gennaker, 11.942 x 11.552 x 6.959, 2.5oz nylon purchased end of 2014
Island Planet Sails, 126%
$1,800
ATN Tacker purchased in 2012
Controls the tack of the cruising spinnaker, wraps around rolled up jib. No need of spinnaker pole on symmetrical
$150
Mainsail purchased in 2013
Island Planet Sails, loose footed, partial battens, 2 reefs, Marblehead Cloth
$3,825
$415
$1,100
Forespar mounted pole chock for Spinnaker pole purchased in 2015
Qty (2) - Mounted on the port side at the front, holding larger spinnaker pole
$100
$1,250
Barlow 24 winch 2-speed, Australia purchased in 2009
Qty (2)
$240
Barton Wincher Self Tailer purchased in 2009
Qty (2) Converts standard above mentioned winch to self-tailer
$80
Barbarossa 8" Winch Handle - Locking grip purchased in 2009
$25
REPLACE ALL RIGGING in 2008
Qty (2) - White powder coated, 1.25Amps, 12 VDC, 30,000-50,000 hours/life
$300
Jack Lines - flat 1" red webbing made in 2011
One on each side of the boat and a very short one in the cockpit
$70
SOSpenders Inflatable 38-Series for 30-52" chest purchased in 2009
Qty (2) - Cartridge changed in 2015, not for people under 80#
Qty (2) – Re-Arming kits purchased in 2015 – Spare
$360
Lifesling2 purchased in 2012
Enclosed with Sunbrella cover
$200
Black Diamond Bod Climbing harness purchased in 2013
Medium size, price includes a polygrip Suncor Harness Clip
$80
West Marine Bosun Chair purchased in 2009
$60
Forespar Probe Light Solas purchased 2009
$120
Olin Alert/Locate Marine Signal Case purchased in 2009
Flares are outdated, value of case and gun only
$45
$30
Water Witch bilge pump switch model 217 purchased in 2013
Spare, 12V, 10A, Submersible
$60
Fire extinguishers purchased in 2009
Qty (3)
$60
$25
24" bolt/chain cutter for emergency cutting of rigging purchased in 2012
$75
Track Car Midship Cleats purchased in 2011
Qty (2) - Garhauer - LLC-2, 1.25" track, 8" long
$130
$120
$95
$100
$50
$70
Rope clutch purchased in 2008
Garhauer - 11-13S, 5/16-9/16" line (3 clutches), 1,000# working load
$155
$200
$90
$65
$50
$130
Selden CX-25 Gennaker/Code 0 Furler purchased end of 2014
Only used twice
$1,935
Gennaker, 11.942 x 11.552 x 6.959, 2.5oz nylon purchased end of 2014
Island Planet Sails, 126%
$1,800
Asymmetrical Spinnaker with ATN sock, Spinnaker purchased in 2012,
ATN sock made in 2015
$1,100ATN Tacker purchased in 2012
Controls the tack of the cruising spinnaker, wraps around rolled up jib. No need of spinnaker pole on symmetrical
$150
Jib purchased in 2009 – new sun
shield made in 2015
$350Mainsail purchased in 2013
Island Planet Sails, loose footed, partial battens, 2 reefs, Marblehead Cloth
$3,825
Jiffy Jax System installed in 2011
5 lines/side, SS rings,
Spreader Mount, Cockpit deploy $415
Tide Marine sailtrack purchased in 2015
Qty
(36.5 feet)$1,100
Whisker pole 12'-22' Line Control Forespar purchased in 2011
$1,175Forespar mounted pole chock for Spinnaker pole purchased in 2015
Qty (2) - Mounted on the port side at the front, holding larger spinnaker pole
$100
Whisker pole 7'-15' Forespar purchased in 2013
$400
Furlex Type B MK II jib furling and reefing system refurbished in
2009
$1,275
Lightning protection system installed in 2015
Installation may not be
completed (looks like two connections are not done) but all parts are
there. www.marinelightning.com $1,250
| Part of the lightning protection system - underwater |
Lewmar Winch Pro-Series 16, Chrome,
2-speed purchased in 2015
$320Barlow 24 winch 2-speed, Australia purchased in 2009
Qty (2)
$240
Barton Wincher Self Tailer purchased in 2009
Qty (2) Converts standard above mentioned winch to self-tailer
$80
Titan 10" Winch Handle - Floating - Locking grip purchased in
2015
$50Barbarossa 8" Winch Handle - Locking grip purchased in 2009
$25
Barient 8" Winch Handle - no locking grip purchased in 2009
$25![]() |
| New base for mast while replacing all rigging (note that solar fan is no longer on the boat) |
- B-blast aluminum mast and boom - $600
- Prep and remove mast and boom, de-assemble old hardware and fittings, assemble new stuff, step and dock tune - $1,800
- Add folding aluminum mast steps – Qty (16) - $320
- De-assemble roller furling headstay to replace wire - $180
- Replace wiring - $60
- Turnbuckles, 5/16" x 1/2" x 1/2" – Qty (7) - $640
- 5/16" 316 SS 1x19 wire – Qty (240 feet) - $840
- 1/4" 316 SS 1x19 wire – Qty (140 feet) - $325
- #8 Marine Eye, 1/2" Pin, 1/4" Wire – Qty (4) - $70
- #10 Marine Eye, 1/2" Pin, 5/16" Wire – Qty (4) - $95
- #10 Backstay Insulator, 5/16" Wire, 5/18" Thread – Qty (2) - $280
- One set of aluminum spreaders air foil - $350
- Replace mast sheaves – Qty (4) - $140
- 7/16" XLS Yacht Braid, Tracer for four halyards – Qty (480 feet) - $600
- Series 200 Snapshackle, Small Bail 92mm st/st – Qty (4) - $230
- XAS Powerclutch, Single 0612 – Qty (2) - $160
- 15" Windex Wind Vane - $60
- Crane, yard fees - $2,530
Qty (2) - White powder coated, 1.25Amps, 12 VDC, 30,000-50,000 hours/life
$300
Jack Lines - flat 1" red webbing made in 2011
One on each side of the boat and a very short one in the cockpit
$70
SOSpenders Inflatable 38-Series for 30-52" chest purchased in 2009
Qty (2) - Cartridge changed in 2015, not for people under 80#
Qty (2) – Re-Arming kits purchased in 2015 – Spare
$360
Lifesling2 purchased in 2012
Enclosed with Sunbrella cover
$200
Black Diamond Bod Climbing harness purchased in 2013
Medium size, price includes a polygrip Suncor Harness Clip
$80
West Marine Bosun Chair purchased in 2009
$60
Forespar Probe Light Solas purchased 2009
$120
Nautical bell (for fog) – nickel purchased 2011
$90Olin Alert/Locate Marine Signal Case purchased in 2009
Flares are outdated, value of case and gun only
$45
Hand bilge pump 18" (for dinghy mostly) purchased in 2012
$25
Bravo 7 Foot-Pump purchased in 2012
1.69GPM, 5.8PSI - great
for dinghy, SUP, etc.$30
Water Witch bilge pump switch model 217 purchased in 2013
Spare, 12V, 10A, Submersible
$60
Fire extinguishers purchased in 2009
Qty (3)
$60
Cyclops Red/White Light 12V purchased in 2011
3.5 million candles
power spotlight $25
24" bolt/chain cutter for emergency cutting of rigging purchased in 2012
$75
Track Car Midship Cleats purchased in 2011
Qty (2) - Garhauer - LLC-2, 1.25" track, 8" long
$130
Ronstan sheaveless blocks (shocks) purchased in 2015
Qty (10) - Anodized
aluminum, BL 2,200#$120
Double Block with adjustable shackle purchased in 2008
Qty (2) - Garhauer -
30-17US - 2.5" Sheave$95
Cheek Block purchased in 2008
Qty (3) - Garhauer -
30-21SB - 2" Sheave$100
Cheek Block purchased in 2008
Garhauer - 30-24SB - 1
7/8" Sheave$50
Triple block with adjustable shackle purchased in 2008
Garhauer - 30-27US,
2.5" diameter sheave$70
| All sheets and halyards run to the cockpit |
Garhauer - 11-13S, 5/16-9/16" line (3 clutches), 1,000# working load
$155
Rope clutch purchased in 2008
Garhauer - 11-14S,
5/16-9/16" line (4 clutches), 1,000# working load$200
Fiddle Block with adjustable shackle purchased in 2008
Qty (3) - Garhauer -
30-01UAG - 2 5/8" Sheave, 2,000# working load$90
Fiddle Block with Becket and adjustable shackle purchased in 2008
Qty (2) - Garhauer -
30-02UAG - 2 5/8" Sheave, 2,000# working load$65
Fiddle block with Becket, cam cleat, and adjustable shackle
purchased in 2008
Garhauer - 30-06UAG - 2
5/8" Sheave, 2,000# working load$50
Stanchion blocks purchased in 2008
Qty (4) - Garhauer -
SB-3$130
TOTAL: $27,750
Does not account for blocks, installed/mounted at base
of mast or stanchions




Comments
Post a Comment